M50
This three-phase industrial vacuum cleaner is suitable for any production application: workshop, laboratory, engineering industry, cement plant, carpentry or craft store.
Do you need to change accessories during vacuuming?
No problem, the “M” series has a built-in accessory holder that allows you to always have the right accessory with you.
The powerful 4- or 4.3-kW side-channel turbine makes it possible to greatly increase the generated vacuum while keeping the size small.
The HV version is particularly suitable for suction of grit and heavy solids, thanks to the two-stage turbine in series.
The configuration for unloading onto grating or container makes the vacuum cleaner the tool of choice for blasting operators to remove grit residue from artifacts and the work environment.
Equipped with a 100-liter capacity container that can be easily detached, built with extremely strong steels and plastics, this wheeled vacuum will stand the test of time and the heaviest applications.
Available PN model with an effective filtration system consisting of large surface area filter cartridges with innovative automatic cleaning system against air current. Particularly suitable for treating very fine dust in large quantities that could prematurely clog common filtration systems.
Particularly suitable for continuous service (even 24/24 hours), the aspirator is equipped with a 4 and 4.3 kW side channel turbine capable of generating a very high depression, higher than that of transmission systems of similar power.
The electrical panel is integrated inside the aspirator. A vacuum gauge allows you to constantly check the level of depression and the saturation state of the filter, as well as promptly detect any anomalies.
A double silencer reduces noise and dampens the impact of the outgoing air.
Cat. “L” polyester filter with manual filter shaker system. Filtration efficiency 3 microns (German BIA certified). It is not necessary to remove the head and filter from the vacuum cleaner to empty the collection container.
The convenient manual lever filter shaker helps to always maintain high suction performance even in continuous service or when used in centralized systems.
The front suction system with a Ø80 cast aluminum mouth positioned below the filter allows you to simultaneously suck dust, solids and liquids (within the capacity of the container) without the need to replace or remove the filter.
The aspirated material is deposited in a steel release container mounted on wheels (100 liter capacity), which allows the aspirated material to be disposed of quickly and without getting dirty, with the possibility of bagging.
Also available in ATEX certified version.
Data sheet
Detailed specifications and technical data. Download the complete technical data sheet to always have all the information at hand.
Download the Data sheet| M50 | |
|---|---|
| Voltage | 400 - 50 3~ V - Hz |
| Power | 4 kW |
| Max waterlift | 3.200 mmH2O |
| Max air flow | 420 m³/h |
| Suction inlet | 80 mm |
| Primary filter | Tasche |
| Superficie – diametro | 20.000 cm² - 420 mm |
| Capacità | 100 lt. |
| Dimensions | 119x65x160h |
| Weight | 137 kg |