W3 Infini ATEX – Atex Zone 22 certified three-phase industrial vacuum cleaner

The ATEX-certified W3 infini Z22 three-phase industrial vacuum cleaner is the ideal solution for cleaning and vacuuming dust and debris in industrial workplaces classified as Atex Zone 22 Dust (3D), where a reliable, efficient and space-saving vacuum cleaner is needed.

It is available in 2.2kW and 4kW versions.

The aspirator is equipped with a cast aluminum suction unit of the side channel blower type, in which the impeller is fixed directly on the motor shaft, and without transmission systems: this almost completely reduces wear on the components and the consequent maintenance needs. These characteristics, together with the silence, make the engine particularly suitable for continuous service (even 24 hours a day), and allow it to develop a very high vacuum, higher than transmission systems of similar power.
Two turbine models are available, 2.2 and 4kW.

The control panel of the aspirator consists of a push-button panel, containing a thermomagnetic switch, in compliance with the ATEX directive. A vacuum gauge allows you to constantly check the level of depression and the saturation state of the filter, and to promptly detect any anomalies. A double silencer reduces noise and dampens the impact of the outgoing air.

The turbine is equipped with a vacuum relief valve. If the maximum vacuum is reached due to a blocked tube, it allows ambient air to enter the turbine to cool it.

All electrical parts comply with the ATEX 94/9/EC directive and are suitable for Group II – Category 3D (Zone 22)

Antistatic Cat. “M” polyester filter with manual filter shaker system operated by filter shaker lever.

It is not necessary to remove the head and the filter to empty the collection container.

A manual cleaning system, consisting of a vertically moving filter shaker, allows the operator to clean the filter effortlessly and at any time, prolonging the life of the filter itself, preventing saturation while maintaining the machine’s suction performance constant. The front suction system with a Ø80 cast aluminum mouth positioned below the filter allows you to simultaneously suck dust, solids and liquids (within the capacity of the container) without the need to replace or remove the filter.

The aspirated material is deposited in a steel release container mounted on wheels (65 liter capacity), which allows the aspirated material to be disposed of quickly and without getting dirty, with the possibility of bagging.

Data sheet

Detailed specifications and technical data. Download the complete technical data sheet to always have all the information at hand.

Download the Data sheet
W3 Infini ATEX – Atex Zone 22 certified three-phase industrial vacuum cleaner
Voltage400 - 50 ~ 3 V - Hz
Power2,2 - 4 kW
Max waterlift2.600 - 1.900 mmH2O
Max air flow420 - 320 m³/h
Suction inlet80 mm
Primary filterTasche
Superficie – diametro20.000 cm² - 420 mm
Capacità65 - 100 lt.
Dimensions108 x 62 x 137h
Weight106 - 121 kg

Request information