MHD 100 – Industrial vacuum cleaner for heavy-duty applications and centralized vacuum systems

The new MHD family of industrial vacuum cleaners is designed for particularly heavy-duty applications, where great suction power combined with great strength and versatility of use is needed.
The MHD100 industrial vacuum cleaner is suitable for heavy-duty use andcontinuous use. The large surface area of the filter and the large capacity of the container enable a high working range without interruption.

These machines can also be used as stationary units for centralized vacuum systems.

Available in ATEX-certified version.

Available PN model with an effective filtration system consisting of large surface area filter cartridges with innovative automatic pneumatic cleaning system with counter-current air system.
Particularly suitable for treating very fine dust in large quantities that could prematurely clog common filtration systems.

The MHD 100 industrial vacuum cleaner is equipped with a cast aluminum suction unit of the side channel blower type, whose impeller is fixed directly to the motor shaft, and without transmission systems.
This allows us to reduce the wear of the components and the consequent maintenance needs to a minimum.
The control panel consists of a start-stop push-button panel, containing a thermal-magnetic switch. A vacuum gauge allows you to constantly check the level of depression and the saturation state of the filter, and to promptly detect any anomalies.
A double silencer reduces noise and dampens the impact of the outgoing air.
The industrial turbine of the vacuum cleaner is equipped with a vacuum relief valve. If maximum vacuum is reached, for example in the case of a blocked pipe, it lets external air enter the turbine to cool it.

Cat. “L” polyester filter with 3 micron filtration efficiency.

A manual cleaning system, composed of a manual filter shaker, allows the operator to clean the filter effortlessly and at any time, prolonging the life of the filter itself, preventing its saturation while maintaining the suction performance of the machine constant. The tangential suction system with a Ø120 cast aluminum mouthpiece positioned underneath the filter allows you to simultaneously suck up dust, solids and liquids (within the capacity of the container) without the need to replace or remove the filter.

The aspirated material is deposited in a steel release container mounted on wheels (160 liter capacity), which allows the aspirated material to be disposed of quickly and without getting dirty.
These machines can also be used as fixed units for centralized vacuum systems.

Data sheet

Detailed specifications and technical data. Download the complete technical data sheet to always have all the information at hand.

Download the Data sheet
MHD 100 – Industrial vacuum cleaner for heavy-duty applications and centralized vacuum systems
Voltage400 - 50 3~ V - Hz
Power7,5 kW
Max waterlift4.500 mmH2O
Max air flow750 m³/h
Suction inlet120 mm
Primary filterTasche
Superficie – diametro70.000 cm² - 560 mm
Capacità160 lt.
Weight332 kg

Request information